the ballast tanks are meant to be run prior to the pumps lose s

  • Teaming program stakeholders including customers, regulators, scientists and gov departments, Hyde pioneered the application of mechanical separation and UV disinfection like a ballast water management solution at After a few years of land-based and shipboard prototype testing and lessons learned, the Hyde GUARDIAN® (HG) emerged in 2003.

    The HG includes an auto-back flushing filter which removes sediment and larger plankton, as well as a powerful medium pressure UV disinfection system which destroys or inactivates smaller organisms and bacteria. Such systems can easily be included in the ship's ballast control system and, due to its low pressure drop modifications to existing ballast pumps usually are not required.

    In the sequential method, the ballast tanks should be run before pumps lose suction and after that stripping arrangements are applied. The Chief Engineer Officer must render full co-operation because it is a critical operation for that pumps. In ballast pumps with gland packing stuffing boxes, the gland packing can overheat caused by unavailability of cooling and lubricating water. In ballast pumps with mechanical seals, the mechanical seals could be damaged because of overheating as a result of a shortage of cooling and lubricating water. The Chief Engineer Officer must instruct every one of the junior engineers and subordinates about the same and make certain compliance while protecting the pumps. Effective check and watch ought to be posted near to the pumps.

    The quartz sleeve and power assemblies were designed for simple and fast removal from your UV Sterilizer body. You can eliminate the entire assembly with only a few twists for or you can easily replace the UV Lamp without disrupting the lake flow by solely detaching the power assembly. The connections are watertight and seals go on for 12 months.More information check this link